Home Case Histories Metal Production

Case Histories

${picture_description}$

Radiant Tube

The tube was shipped to an Emisshield preferred installer in Sweden for the application. The tube was cleaned with a light grit blast and then coated with Emisshield on the outside surface.
More About This Case
${picture_description}$

Walking Beam Furnace

Emisshield was applied to the top heat zone down slightly below the billet line. The customer’s goal was to improve energy efficiency of the furnace. This application occurred in September 2008.
More About This Case
${picture_description}$

Bell Annealing Furnace

Emisshield was applied to the external and internal surfaces of the inner bell unit. No product was applied to the outer bell unit. This application occurred in July 2007.
More About This Case
${picture_description}$

Heat Treating Furnace

This was a relatively small commercial heat treating furnace used to heat high alloy castings to a maximum temperature of 2230°F. This furnace was highly monitored and complete baseline performance data were available. At the time the coating was applied, all refractory substrates had seen extensive service.
More About This Case
${picture_description}$

Deltas

Emisshield was applied to the hot face and to the electrode ports of pre- cast deltas manufactured from the silica-free castable. This application was completed in April 2004.
More About This Case