Case Histories

  • {picture_description}

    EDC Craking Furnace

    Emisshield was applied to Incoloy process tubes (serpentine), to the hard refractory sidewalls and ceramic fiber roof.  This application occurred in November 2007.

    More About This Case
  • {picture_description}

    Biomass Furnace

    Emisshield was applied to a Biomass Boiler in Sweden. Numerous benefits include greater than 10% increase in output (steam) and reductions in air emissions.

    More About This Case
  • {picture_description}

    Bell Annealing Furnace

    Emisshield was applied to the external and internal surfaces of the inner bell unit. No product was applied to the outer bell unit. This application occurred in July 2007.

    More About This Case
  • {picture_description}

    Walking Beam Furnace

    Emisshield was applied to the top heat zone down slightly below the billet line. The customer’s goal was to improve energy efficiency of the furnace. This application occurred in September 2008.

    More About This Case
  • {picture_description}

    Gas Boiler

    Emisshield was applied to the refractory and carbon steel tubes within a water wall gas boiler. Benefits include the ability to lower excess air to the boiler and improve boiler efficiency between 4-5%.

    More About This Case
  • {picture_description}

    Radiant Tube

    The tube was shipped to an Emisshield preferred installer in Sweden for the application. The tube was cleaned with a light grit blast and then coated with Emisshield on the outside surface.

    More About This Case
  • {picture_description}

    Commercial Baking

    Emisshield is a nano-ceramic coating that provides the highest infrared heating capabilities. Our coatings improve oven energy efficiency from 15%-25% and create a better product in both new and current ovens.

    More About This Case